Products

 

All Category   »  Environmental & Safety   »  Indoor Air Quality Monitoring   »  Gas Detector   »  CGas

cGas

 

Product Detail

 

cGas CO2

For monitoring: Carbon dioxide
 

CGAS-detector

For monitoring: Ammonia, Carbon monoxide, Carbon dioxide, Chlorine, Ethylene, Ethylene oxide, Fluorine, Formaldehyde, Hydrogen, Hydrogen sulphide, Hydrogen chloride, Hydrogen cyanide, Hydrogen fluoride, Nitric oxide, Nitrogen dioxide, Oxygen, Ozone, Phosphine, Silane, Sulfur dioxide, Methane, Propane, Hydrogen, TVOCs, Refrigerants
 

ESH-A

For monitoring: Methane, Propane, Hydrogen, TVOCs
 
TS Label 750 Plain
 

Mechanical
Enclosure Black ABS / Polycarbonate, corrosion resistant Copper coated interior to reduce RF interference IP54 rated with standard splash guard installed (Option -S)
Weight 400 g / 14 oz
Size 127 x 127 x 76 mm / 5.0 x 5.0 x 3.0 inches

User Interface
Display (standard)
2-line by 16 character LCD, black on green
Operating Temp: 0°C to 40°C / 32°F to 104°F
Display (Option -LT) 2-line by 16 character OLED display for cold environment applications down to -40°C / -40°F, yellow on black
Push Buttons Initiate calibration and menu options with internal UP, DOWN and ENTER push buttons
USB Port Internal port for USB memory stick for field firmware / configuration upgrades

Input/Output
Communication
User configurable in the field, BACnet® MS/TP (version 1 rev 14) RS-485 or Modbus® RTU (version 1.1b3) RS-485

Electrical
Power Requirement
16-30 VDC, 3 W, Class 2
12-27 VAC, 50-60 Hz, 3 VA, Class 2
Wiring
VDC or VAC (ground referenced) 4-conductor shielded 16 AWG stranded within conduit, network wiring (daisy-chain)
Fuse(s)
Automatic resetting thermal

Environmental
Operating Temperature
Standard: 0°C to 50°C (32°F to 122°F) with Option -LT: -40°C to 50°C (-40°F to 122°F)
Operating Humidity
15 - 90% RH non-condensing

Certifications
Conforms to
CSA-C22.2 No. 205-12, UL508 (Edition 18):2018
EMC Directive 2014/30/EU, EN 50270:2015, Type 1, EN61010
FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Listed by BTL
RoHS compliant circuit boards

  • Parking Facilities
  • Vehicle Repair Shops
  • Ice Arenas
  • Swimming Pools
  • Refrigeration Rooms
  • Chiller Rooms
  • Battery Charging RoomsManufacturing Plants
  • Maintenance Facilities
  • and many more...

  • 1 or 2 internal gas channel configurations
  • User in the field configurable BACnet® MS/TP RS-485 or Modbus® RTU RS-485 digital output signal with a BAS
  • Easy Plug & Play Smart Sensor replacement at end of life, comes pre-calibrated
  • Bright LCD display
  • USB port for configuration changes and firmware upgrades
  • Optional RH & Temperature sensor on select models (Option -RHT)
  • Optional low temperature operation package (Option -LT)
  • Optional factory installed splash guard (Option -S or Option -SN)
  • Standard black, ABS/polycarbonate, water / dust tight, corrosion resistant enclosure (drip proof)
  • Sensor Calibrating Extending Firmware (CEF) for enclosed parking applications
  • RoHS compliant circuit boards

 

สนใจข้อมูลเพื่มเติมฝากรายละเอียดการติดต่อไว้ด่านล่างได้เลยค่ะ

 
 
Phone : 02-030-5852 | Email : sales@tasatec.com | Facebook : facebook.com/tasatec
© 2019 Tasatec.com. All Rights Reserved.