Pressure Transmitter

The DP  (differential pressure) and SP (static pressure) transmitters are designed for monitoring filters, and any process with particulate. They prevent the clogging that occurs with gauges and sensors that use a small tube to the dirty side of the process. A rugged ceramic sensing element provides accurate measurements in the 0–10″ WC range.

Additional information

Measure Component

Pressure

Description

The DP  (differential pressure) and SP (static pressure) transmitters are designed for monitoring filters, and any process with particulate. They prevent the clogging that occurs with gauges and sensors that use a small tube to the dirty side of the process. A rugged ceramic sensing element provides accurate measurements in the 0–10″ WC range.

For differential measurements (DP), the durable ceramic diaphragm is mounted to the dirty side of a process. Such as below the tube sheet on a baghouse or on the dirty side of a wet scrubber. The reference port is routed to the clean side. The static version (SP 20T) is for measuring static pressure or vacuum.

A remote control unit is available for local display, PID loop control, relay alarming, and fieldbus communications. The DP  and SP are commonly ordered with B-PACs™ and IntelliPULSE™ timers.

Configuration: Differential Pressure, Static Pressure
Supply Voltage: +15 to 40VDC
Output: 4-20mA, 2-wire
Range: 0 – 10” WC Std, 0-20″, -10 to +10″WC and other ranges Opt
Accuracy: Total Error <1.5% FS

Based on zeroing at ambient. Zeroing at temperature reduces error.

Response Time: 500 microseconds
Resolution: Infinite
Action: Positive at diaphragm Std, negative at diaphragm & bidirectional Opt
Proof Pressure: 100” WC for 0-10” WC range, higher consult factory
Process Temperature: -13F (-25C) to 250F (120C), Std

-13F (-25C) to 450F (232C), Opt

Process temperatures over 250F require thermal isolation mount

  • Baghouses & Cartridge Filters
  • Process Control & EPA Compliance
  • Scrubbers & Mist Eliminators
  • Process Ventilation
  • Powder Processing
  • Non-Clogging Design
  • 2-Wire Loop Power, 4-20mA
  • State-of-the-art capacitive sensing element
  • 0–10″ WC and higher ranges (also bi-directional ranges)
  • Temperature compensation for accurate measurement
  • All 316L stainless steel body
  • Convenient tri-clamp mounting

No Accessories data.

No Media Data.

No Download Data.

Additional information

Measure Component

Pressure

หากลูกค้าสนใจสินค้าหมวดหมู่

Pressure Transmitter

สามารถติดต่อเราได้ที่นี่