LPT Low Power Gases Transmitter

LPT เป็นเซนเซอร์วัดแก๊สชนิดส่งสัญญาณที่พร้อมที่สุดตัวนึง มีสัญญาณอนาลอคออก หน้อจอแสดงผล รวมถึง contact relay (2 A ที่ 30 V SPDT) ให้เลือกใช้งาน

For monitoring: Ammonia, Carbon monoxide, Nitrogen dioxide, Chlorine, Oxygen or Sulphur dioxide

Single channel, analog gas detector for enclosed parking facilities, recreational facilities, oxygen depletion applications

Tags: , , , , , ,

Additional information

Application

Air Quality

Measure Component

gases, refrigerants, TVOC

Description

LPT Low Power Transmitter เป็นเซนเซอร์วัดแก๊สชนิดส่งสัญญาณที่พร้อมที่สุดตัวนึง มีสัญญาณอนาลอคออก หน้อจอแสดงผล รวมถึง contact relay (2 A ที่ 30 V SPDT) ให้เลือกใช้งาน

The LPT is an economical, single sensor, analog transmitter for monitoring toxic gases non-hazardous, non-explosion proof rated commercial and light industrial applications.

LPT and LPT-A Analog Gas Detectors - YouTube

 

Mechanical
Enclosure
ABS / Polycarbonate, corrosion resistance
Copper coated interior to reduce RF interference
IP54 rated with optional splash guard installed
Weight
200 g / 0.44 lbs
Size
127 x 127 x 53 mm / 5.0 x 5.0 x 2.1 inches
User Interface
Display
Single color status LED
Input/Output
Output
Linear 4 – 20 mA
Maximum 216 Ω load
(wiring plus termination resistor) at 16 VDC
Maximum 316 Ω load
(wiring plus termination resistor) at 12 VAC
Electrical
Power Requirement
2-wire mode: 16 – 30 VDC, 1 W, Class 2
3-wire mode: 16 – 30 VDC, 1 W, Class 2
4-wire mode: 12 – 27 VAC, 50-60 Hz, 1 VA, Class 2
Current Draw
25 mA @ 24 VDC (max)
Wiring
VDC 2-conductor 18 AWG stranded, shielded
VDC 3-conductor 18 AWG stranded, shielded
VAC 4-conductor 18 AWG stranded, shielded
Fuses
Thermal, resetting
Environmental
Operating Temperature
-20°C to 40°C (-4°F to 104°F)
Operating Humidity
15 – 90% RH non-condensing
Certifications
Conforms to
CSA-C22.2 No. 205-M1983 (R2009), UL508 (Edition 17):2007
EMC Directive 2004/108/EC, EN 50270:2006, Type 1, EN61010
FCC. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RoHS compliant circuit boards
  • Parking Facilities
  • Vehicle Repair Shops
  • Manufacturing Plants
  • Maintenance Facilities
  • Ice Rinks
  • Aquatic Facilities
  • Chiller Rooms
  • Chemical Storage Rooms
  • Oxygen Depletion
  • Single channel
  • Linear 4 – 20 mA output signal
  • 2-wire loop, 3-wire VDC or 4-wire VAC power
  • Standard water / dust tight, corrosion resistant enclosure (drip proof)
  • IP54 rated with optional splash guard installed
  • CAL 2000 LT Calibration System
  • Metal Protective Guard
  • Calibration Kit
  • GENie Calibration Systems
  • RSH-24VDC Remote Strobe & Horn Combo (with Enclosure)
  • Remote Audible Alarm
  • Magnetic Wand
  • Bump Test Systems

No Media Data.

Additional information

Application

Air Quality

Measure Component

gases, refrigerants, TVOC

หากลูกค้าสนใจสินค้าหมวดหมู่

LPT Low Power Gases Transmitter

สามารถติดต่อเราได้ที่นี่