เกจวัดระดับของเหลวในถัง มีช่วงการวัดสูงสุด 30 เมตร (100 ฟุต) เหมาะสำหรับของเหลวไวไฟ เป็นพิษ และกลายเป็นไอ ไม่มีชิ้นส่วนไฟฟ้าภายในถัง ปลอดภัย 100%
Non-invasive Level Gauge
- No electrical power parts inside the tank, 100% safe
- Max Measuring Range 30meters (100ft)
- No downtime/empty tank during installation
- No tank break-in; Non-drilling; No leakage risk
- No moving part, No maintenance
- Operated by a remote control, No PC, No Oscilloscope
- Local display + Remote output (4-20mA/RS-485)
- Best for flammable, toxic, vaporized liquid.
- ATEX, CE, SIL, ISO 9001
Additional information
| Measure Component | level |
|---|
Description
เกจวัดระดับของเหลวในถัง มีช่วงการวัดสูงสุด 30 เมตร (100 ฟุต) เหมาะสำหรับของเหลวไวไฟ เป็นพิษ และกลายเป็นไอ ไม่มีชิ้นส่วนไฟฟ้าภายในถัง ปลอดภัย 100%
Non-invasive Level Gauge
Whether your tank management application is best served by Radar, Servo, or Ultrasonic, SKE offers advanced level measurement solutions:
– Non-invasive Sensing Technique
This Non-invasive Level Gauge adopts the principle of Sonar Ranging.
When the probe sensor is bonded to the bottom wall of the tank, a sound wave travels through the tank/medium and reflects back from the liquid surface.
The sensor is responsible for emitting and receiving sound waves, then transmits them to the system, and calculates the height (H) of the liquid, from the time (t) taken for the signal to be received.
Technical specifications
| Max Measuring range | 30 m |
| Measuring error | ±1%FS |
| Transfer volume | ±100m |
| Frequency range | 20k-400k |
| Signal output | 4~20 mA, MAX 500Ω |
| Communication | RS-485, IR |
| Environment temperature(transmitter) | -20℃~+70℃ |
| Environment temperature(sensor) | -50℃~+85℃ |
| Ambient humidity | (0~100%)RH |
| Explosion-proof | Exd II CT6 |
| Enclosure protection grade | IP67 |
| Power supply | DC 24V |
| Cable length option(sensor to the transmitter) | 5m,10m,15m,20m,25m,30m |
| Weight(transmitter) | 2.5KG |
| Size(transmitter) | 217mm(length)*160mm(width)*185mm(height) |
| Base hole diametter | 6mm |
Two Wire Non-invasive Level Gauge
The Non-invasive Level Gauge is in use everywhere where the level of liquids in tanks has to be measured continuously and contactlessly. Application possibilities for radar gauges can be found in almost all areas of industry. Sewage treatment plants and water purification plants in particular, but also other environmental engineering facilities as well as power generating stations now rely on cost-effective radar sensors for continuous level measurement.
Spherical tank
Level measurement in the spherical tank
Horizontal tank
Level measurement and point level detection in the Horizontal tank
Vertical tank
Vertical tank Level measurement
- No electrical power parts inside the tank, 100% safe
- Max Measuring Range 30meters (100ft)
- No downtime/empty tank during installation
- No tank break-in; Non-drilling; No leakage risk
- No moving part, No maintenance
- Operated by a remote control, No PC, No Oscilloscope
- Local display + Remote output (4-20mA/RS-485)
- Best for flammable, toxic, vaporized liquid.
- ATEX, CE, SIL, ISO 9001
No Accessories data.
No Media Data.
Additional information
| Measure Component | level |
|---|
หากลูกค้าสนใจสินค้าหมวดหมู่
เกจวัดระดับของเหลวในถัง Non-Invasive Level Gauge
สามารถติดต่อเราได้ที่นี่
