เครื่องวัดวิเคราะห์ไฮโดรคาร์บอนที่ควรมีไว้ในงานต่างๆ Trace Total Hydrocarbons (THC) Analyzer

Description

Monitors Gas Stream Inflammability Levels and Gas Purity in Bulk Gases

เครื่องวัดวิเคราะห์ไฮโดรคาร์บอนที่ควรมีไว้ในงานต่างๆที่มีแก๊สเป็นส่วนประกอบ สามารถตรวจจับ และตั้งเตือน ก่อนที่ปริมาณไฮโดรคาร์บอนจะสูงในระดับที่ติดไฟได้

The LD2000 is an easy to use instrument that offers the ideal solution for total hydrocarbon measurements. Its compact design and small footprint make it easy to install alongside other equipment, and it is robust to withstand tough industrial conditions in daily use. The LDetek Flame Ionisation Detector (FID) and electronic communication platform offer the high performance required by plant operators.

Detector Type	Flame Ionisation Detector
Range	0 – 10 ppm> 0 – 100 ppm 0 – 1000 ppm Other range possible
Repeatability	< 1% full scale
Accuracy	Better than ± 1% full scale
Standard Features	Manual or autoranging (user selectable) Microprocessor controlled 5.6” TFT intelligent LCD module with Touch Screen Self diagnosis system with auto-resolve alarm 4-20 mA isolated output Alarm Historic Digital ouputs for remote monitoring: (all dry relay contacts) System status (1 output) Range in use (3 output) Calibration in use (1 output)
Options	Serial port: RS-232 / 422 / 485 / Profibus 2 alarm outputs (user programmable set point)
Gas Connections	Sample: 1/8” compression fittings Vent: 1/8” compression fitting
Calibration Gas	Zero: LDP1000 purified gas (Getter) Span: 80%-90% of full scale of methane
Sample Flow Requirements	50 to 200 sccm
Air Flow Requirements	200 to 600 sccm
Fuel Flow Requirements	40 to 150 sccm
Recommended Maximum Operating Pressure	40 PSIG)
Recommended Minimum Operating Pressure	10 PSIG
Operating Temperature	10 °C to 45 °C
Supply	115 VAC, 50 – 60 Hz or 220 VAC, 50 – 60 Hz
Power Consumption	Maximum 50 watts
Drift	< ± 1% over 24 hours
Weight	27 lbs (12 kg)

Air separation unit
Cryogenic truck loading station
Speciality gas laboratories
Process control
Steel Industries
Chemical plants
Welding gas control
Gas management system
Quality control for truck fills and gas cylinders
Safety
Product validation
Scrubber & oxidizer efficiency
Carbon bed breakthrough detection
Well logging
Industrial hygiene & safety monitoring
Fence line (perimeter) monitoring around industrial sites
CEMS (continuous emission monitoring systems)

Features

LDetek Flame Ionisation Detector (FID) design offering low maintenance
Bootloader integrated for software update via Ethernet
Large scale measurement
4-20 mA output as standard
Range Identification Relay
Unique LDetek Electronic flow controller design
3U cabinet

No Accessories data.

No Media Data.

Additional information

Application	Chemical plants, gas cylinders, industrial bulk gas production, industrial sites, Steel Industries

Additional information

Description

Additional information

หากลูกค้าสนใจสินค้าหมวดหมู่