Consistency      0.35 % ~ 0.8%

Dryness Degree                      At Suction Couch Roll : 23%±2%

Before Dryer Part : 47%

At Spool Roll : 92%

NIP1^stPress       Designed 70-80 KN/M

2^nd Press            Designed 100-110 KN/M

3^rd Press           Designed 250-260 KN/M

Tension of Wire, Felt and Canvas

Max. 6  KN/m at Wire part

Max. 4.5KN/m at Press part.

Max. 4 KN/m at Dryer part

Deryer Steam pressure         Operation 5 Kg/cm2.

Capacity list table （m/min）Unit: g/m²

Sizing:2-5g/m²

1. STOCK PREPARED SYSTEM.

1. WASTER PAPER LINE:

1. 1 SET HYDRA PULPER散漿機:

型    號 Type                                             : D

原    料 Furnish                                         : Used forOCC

桶槽型式 Model of Tub                            : D type  (excluded)

操作濃度 Operating Consistency     : 4% ~6 %

篩板孔徑Screen Plate Perforation:φ16 mm

傳動方式 Diving Device                           :皮帶轉動By belt driving.

立式電機 Motor Rating                             : 300kw x10p

2. 1 SET SLUSH SORTOR雜質分離機:

Type 型號                                                  : SORTOR-II

Furnish      原料                                                   : Used for OCC

Operating Consistency操作濃度               : 3.0~4.0%

Screen Plate Perforation篩板孔徑             : φ12 mm

Diving Device傳動方式                                     : By belt driving.皮帶轉動

Motor Rating水平式電機                         : 55kw x 6p(Excluding)

3. 1 SET DRUM SCREEN 圓鼓篩:

Model型號                                                          : 4500

Furnish原料                                                         :OCC

Operating Consistency 操作濃度       : 2 ~2.0%

Aperture of Drum圓鼓孔徑              :φ12 mm

Diving Device傳動方式                             : By belt driving.皮帶轉動

Motor Reducer減速馬達                            : 5.5kw x 4p (Include motor)

4. 1 SET HIGH DENSITY CLEANER 高濃度除渣器:

Model型號                                                         : HD-2649

Type規格                                                  : C Type

Furnish原料                                              : OCC

Operating Consistency操作濃度      : 4~5%

5. 1 SET HIGH DENSITY CLEANER 高濃度除渣器:

Model型號                                                         : HD-2649

Type規格                                                  : C Type

Furnish原料                                              : OCC

Operating Consistency操作濃度      : 4~5%

6.1 SET      1^st stage Coarse Screen 一段粗篩:

Screen Type 型式                     : slush separator 125.

Pulp 漿料                : OCC

Consistency 濃度                     : 2.0 % ~ 3.0 %

Dia. of Basket 篩板                           : ψ4.5mm

Power動力           :220 kw x 6p

7.1 SET      2^nd stage Coarse Screen 二段粗篩:

Screen Type 型式                     : RS-2

Pulp 漿料                :  OCC

Consistency 濃度                     : 2.0 % ~ 3.0 %

Dia. of Basket 篩板                           : ψ4.0mm

Power動力           :55 kw x 6p

8. 2 Sets M DENSITY CLEANER 中濃度除渣器:

Model型號                                                         : HD-2649

Type規格                                                  : C Type

Furnish原料                                              : OCC

Operating Consistency操作濃度      : 2~4%

9. 2 Sets 1^st stage Fine Screen 一段精篩:

Screen Type 型式                    : MD-30.

Pulp 漿料              :  OCC

Consistency 濃度                             : 1.0 % ~ 2.0 %

Dia. of Basket 篩板                           : 0.25mm

Power動力           :150 kw x 6p

10. 1 Set 2^nd stage Coarse Screen 二段粗篩:

Screen Type 型式                    : MD-30.

Pulp 漿料              :  OCC

Consistency 濃度                             : 1.0 % ~ 2.0 %

Dia. of Basket 篩板                           : 0.30mm

Power動力           :90 kw x 6p

11. 1 SET REJECT SEPARATOR排渣分離機:

Screen Type 型式                    : RS-2

Pulp 漿料                :  OCC

Consistency 濃度                     : 2.0 % ~ 3.0 %

Dia. of Basket 篩板                           : ψ2.6mm

Power動力           :55 kw x 6p

12. 1 SET MD EXTRACTOR盤式脫水機:

Screen Type 型式                    : MDX-2512

Pulp 漿料              :  OCC

Power動力           :15 kw x 4p

13.1 SET               JC-03 CONICAL REFINER 錐型磨漿機:

Type 型式                     : JC-03

Consistency 濃度           : 4 % ~ 5%

Capacity 產量                         : OCC

Power動力                    : 630 kw x 12p(excluding motor)

14. 5 Sets AGITATOR攪拌機:

紙漿濃度 Pulp Density : 3.5~4.5%

安裝馬力Install power :22kw ×6p (Excluding motor)

15. 1 SET Stock Pump:(PULPER,P3-1)

Flow(M3/min) :6000L/MIN

Head(M)      :20mh

Consistency(%): 4.0%

Power(KW)  :30kw×6p

16. 2 Sets Stock Pump:(H.D.Cleaner,P3-2&P3-3)

Flow(M3/min):6000L/MIN

Head(M)      :45mh

Consistency(%): 4.0%

Power(KW)  :75kw×4p

17. 2 Sets Stock Pump:(M.D.Cleaner,P3-4&P3-5)

Flow(M3/min) :5500L/MIN

Head(M)      :32mh

Consistency(%): 3.0%

Power(KW)  :45kw×4p

18. 1 Set Stock Pump:(2^nd stage Coarse Screen,P3-6)

Flow(M3/min) :3500L/MIN

Head(M)      :25mh

Consistency(%): 2.0%

Power(KW)  :22kw×4p

19. 1 Set Stock Pump:(JC-03 CONICAL REFINER,P3-8)

Flow(M3/min) :5500L/MIN

Head(M)      :27mh

Consistency(%): 4.0%

Power(KW)  :37kw×4p

20. 3 Sets Stock Pump:(Chest,P3-7&P3-9&P3-13)

Flow(M3/min) :5500L/MIN

Head(M)      :15mh

Consistency(%): 4.0%

Power(KW)  :22kw×4p

2. FOURDRINIER PAPER MACHINE SPECIFICATION:

A) APPROACHING SYSTEM:

A1. TOP WIRE第一頭箱系統

1. 1 SET Fan Pump:

Flow(M3/min) :35000L/MIN

   Head(M)      :25mh

   Consistency(%):0.35-0.40%

   Power(KW)  :200kw×1150rpm(DC)

2. 1 SET 1^st Stage MACHINE SCREEN 1段網前篩:

Screen Type 型式                   : 25

Capacity 產量               : 32 M3/min

Consistency 濃度                   : 0.35% ~0.40%

Dia. of Basket 篩板                : 2.2mm

Power動力                   : 45 kw x 6p

3. 1 SET 2^nd Stage Vibration SCREEN 2段網前篩:

Screen Type 型式                   :K

Screen width                  :1000mm

Consistency 濃度                   : 0.7 % ~0.8%

Dia. of Basket 篩板                : 2.8mm

Power動力                   : 3.7kw x 6p

A2Under WIRE第二頭箱系統

1. 1 SET Fan Pump:

Flow(M3/min) :35000L/MIN

   Head(M)      :25mh

   Consistency(%):0.35-0.40%

   Power(KW)  :200kw×1150rpm(D.C)

2. 1 SET 1^st Stage MACHINE SCREEN 1段網前篩:

Screen Type 型式                   : 25

Capacity 產量               : 32 M3/min

Consistency 濃度                   : 0.35% ~0.40%

Dia. of Basket 篩板                : 2.2mm

Power動力                   : 45 kw x 6p

3. 1 SET 2^nd Stage Vibration SCREEN 2段網前篩:

Screen Type 型式                   :K

Screen width                  :1000mm

Consistency 濃度                   : 0.7 % ~0.8%

Dia. of Basket 篩板                : 2.8mm

Power動力                   : 3.7 kw x 6p

A3BOTTOM WIRE第三頭箱系統

1. 1 SET Fan Pump:

Flow(M3/min) :42000L/MIN

   Head(M)      :25mh

   Consistency(%):0.6-0.8%

   Power(KW)  :250kw×1200rpm(DC)

2. 1 SET 1^st Stage MACHINE SCREEN 1段網前篩:

Screen Type 型式                   :30

Capacity 產量               : 40 M3/min

Consistency 濃度                   : 0.6% ~0.8%

Dia. of Basket 篩板                : 2.5mm

Power動力                   : 45 kw x 6p

3. 1 SET 2^nd Stage Vibration SCREEN 2段網前篩:

Screen Type 型式                   :10

Consistency 濃度                   : 0.6% ~0.8%

Dia. of Basket 篩板                : 2.5mm

Power動力                   : 15 kw x 4p

4. 1 SET Centrifugal Pump:

Flow(M3/min) :8000L/MIN

   Head(M)      :15mh

   Consistency(%): 0.8%

   Power(KW)  :37kw×1000rpm

1. B) WIRE PART 網部: (2 layer Fourdrinier)

Top Wire Part :

Wire Width: 4800mm.

Length of Wire Part (Breast Roll Center to Return Roll Center):18000mm.

Under Wire Part :

Wire Width: 4800mm.

Length of Wire Part (Breast Roll Center to Return Roll Center):18000mm.

Bottom Wire Part :

Wire Width : 4800mm

Length of Wire Part (Breast Roll Center to Suction Roll Center):47000mm.

With CANTILEVER GUIDE CHANGE.

B.1For Top Wire

1. 1 SET MANIFOLD TUBE SECTION 佈漿管:

2. 2. 1 SET FLOW BOX 流漿箱:

                              Type               :    Close Type.

Slice Width     :    4650 mm.

Components:

• BREAST ROLL 胸轆(dia:680mm)
• FORMING BOARD 成型板:
• FOIL BOXES刮水箱
• WET SUCTION BOXES真空吸水箱:
• DEWATERING BOX 脫水箱
• TRANSFER SUCTION BOX 真空吸水箱:
• FLAT SUCTION BOX 真空吸水箱:
• COMPACT WIRE CYLINDER圓網:(dia:1000mm)

B.2  For Under Wire

1. 1 SET MANIFOLD TUBE SECTION 佈漿管:

2. 2. 1 SET FLOW BOX 流漿箱 :

                              Type               :    Close Type.

Slice Width     :    4650 mm.

Components:

• BREAST ROLL 胸轆(dia:680mm)
• FORMING BOARD 成型板:
• FOIL BOXES刮水箱
• WET SUCTION BOXES真空吸水箱:
• DEWATERING BOX 脫水箱
• FLAT SUCTION BOX 真空吸水箱:
• COUCH ROLL 伏轆:(dia:680mm)
• WIRE DRIVE ROLL 驅動轆::(dia:680mm)

B.3For Bottom Wire

1. 1 SET MANIFOLD TUBE SECTION 佈漿管:

2. 2. 1 SET FLOW BOX 流漿箱 :

                              Type               :    Close Type.

Slice Width     :    4650 mm.

Components:

• BREAST ROLL 胸轆(dia:680mm)
• FORMING BOARD 成型板:
• FOIL BOXES刮水箱
• WET SUCTION BOXES真空吸水箱:
• DEWATERING BOX 脫水箱
• TRANSFER SUCTION BOX 真空吸水箱:
• FLAT SUCTION BOX 真空吸水箱:
• SUCTION COUCH ROLL 真空伏轆: (dia:850mm)
• WIRE DRIVE ROLL 驅動轆::(dia:730mm)

1. C) 3 STAGES PRESS PART 三段壓水部

With CANTILEVER GUIDE CHANGE.

Nip Priessure

Duo-centri-I Press: 1^stNip 70-80 KN/M

2^ndNip                100-110 KN/M

2nd Blind drilled press: 250-260 KN/M

Components:

• SUCTION PICK UP ROLL: (dia:650mm)
• SUCTION CENTER PRESS ROLL:真空中心壓水轆:(dia:1100mm)
• MICROROCK TOPPRESS ROLL:上壓水轆:(dia:800mm)
• PU BOTTOM GROOVED PRESS ROLL:下壓水轆:(dia:800mm)
• PU BLIND DRILLED PRESS ROLL:壓水轆:(dia:1320mm)

1. D) DRYER PART烘缸部🙁 42+16=58 dryer)

      Pre-Dryer section    41 PCS

1^stGroup7 PCS

2^ndGroup10 PCS

3^rdGroup      12 PCS

4^th Group        12 PCS

Drying capacity:350ton/24hrs

Drying diameter:1524mm

Max. operation pressure:5 bar

Water test prsectionessure:10 bar

Inlet dryness:47%

Outlet dryness:90%

Water evaporation(dryer):25kg water/m2-hr

Dryer quantity:41pcs

After-Dryer section18 PCS

5^th Group        2 PCS

6^thGroup        8 PCS

7^thGroup        8 PCS

Drying capacity:350ton/24hrs

Drying diameter:1524mm

Max. operation pressure:5 bar

Water test prsection essure:10 bar

Inlet dryness:68%

Outlet dryness:92%

Water evaporation(dryer):21kg water/m2-hr

Dryer quantity:18pcs

Group arrangement:2 Cr/ 8/ 8

INCLUDED:hood

E)SIZE PRESS PART上膠部

Consistency   : Before Sizer 90%

: After Sizer 68%

Sizing weight:2.5*2gsm

Coating: two side

Solid content:8%

Nip50 KN/M

Components:

• MOVEABLE ROLL: (dia:900mm)
• STATIONARY ROLL:(dia:906mm)
• PAPER ROLL:紙轆:(dia:380mm)
• PAPER ROLL:紙轆:(dia:403mm)
• SPREADER ROLL:彎曲轆:(dia:270mm)

1. F) 4-ROLLS TYPE CALENDER 4轆壓光機: (Max. NIP: 120 KN/M)

Nip120 KN/M

Number of rolls: 4-rolls

Components:

• chilledcalendar ROLL:壓光轆(dia:560mm)
• chilled calendar ROLL:壓光轆(dia:760mm)
• chilled calendar ROLL:壓光轆:(dia:560mm)
• PAPER ROLL:紙轆:(dia:352mm)
• SPREADER ROLL:彎曲轆:(dia:353mm)

1. G) POPE REEL捲紙機:

TYPE: HORIZONTAL PNEUMATIC OPERATION TYPE.

MAX. WINDING DIA.: 3000 MM DIA

Cylinder diameter:1100mm

Reel spool diameter:470mm

Reel spool balance speed:1500m/min

Components:

• Reel drum:滾筒(dia:1100mm)
• reel ROLL:捲紙轆:(dia:470mm)
• SPREADER ROLL:彎曲轆:(dia:353mm)

1. H) HIGH SEPPD REWINDER 高速複捲機:

Type 型式                                         : Double Drum Type 雙輥式

Max Unwind Roll Width紙張寬度   : 4300 mm

Max. Spool Roll dia.最大原紙直徑  : Ø3000 mm

Type of unwinder Roll原紙型式       : Ø470 mm Spool Roller.

Max. rewinder Width最大捲寬度     : 4450 mm

Max. rewinder dia最大捲取直徑      :Ø1500 mm

Core of rewinder複捲紙管                : 6”.

Number of slitters分條數                            : 6Slitting.

Min. Width of slitters最小分條寬     : 450mm

Operation Speed 操作速度                          : Max. 1500 m/min.

(O.S will depend on paper basic weight)

Design Speed設計速度                     : Max. 1500 m/min

Dynamic Balance Test動平衡校正    : 1500 m/min.

Components:

• carryingdrums: (dia:650mm)
• rider ROLL:(dia:368mm)
• PAPER ROLL:紙轆:(dia:285mm)
• PAPER ROLL:紙轆:(dia:400mm)
• SPREADER ROLL:彎曲轆:(dia:200mm)

1. I) WET & DRY BROKE SYSTEM乾濕損紙系統

1. 1 SET COUCH PIT AGITATOR 真空伏轆損紙攪拌機:

Type型式                   :4.

Impeller Dia.                          :1350mm.

Motor馬達                 :37kw x 6P x 1 set

2. 1 SET PRESS PIT AGITATOR 壓榨部損紙攪拌機:

Pulper Type型式        :5

Diameter of Impeller葉輪直徑       :1350mm

Motor Rating立式電機                             :75kw x 6P

3. 1 SET SIZE PIT PULPER上膠部乾損紙散漿機:

Pulper Type型式        :ak Type

Motor Rating立式電機                             :315kw x 6P x 2 sets.

4. 1 SET CALENDER PIT PULPER 壓光機下乾損散漿機:

Pulper Type型式        :ak Type

Motor Rating立式電機                             :315kw x 6P x 2 sets.

5. 1 SET centrifugal pump

Flow(M3/min) :1500L/MIN

   Head(M)      :25mh

   Consistency(%):3.0%

   Power(KW)  :15kw×6p

6. 4 Sets centrifugal pump

Flow(M3/min) :8500L/MIN

   Head(M)      :25mh

   Consistency(%):3.0%

   Power(KW)  :55kw×6p

J)PNEUMATIC(hydraulic) CONTROL SYSTEM 空壓(油壓)控制系統

１.      2units         oil-pressure generating plant

For the operation of the

wire section,

press section,

calendar

pope reel

2. 2units pneumatic control plant

For the operation of the

Size press,

pope reel

K)VACUUM SYSTEM 真空系統:

1. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Box & supporting Wire真空吸水箱.

Capacity          : 75m3/min x 0.03-0.035Mpa.

Motor             : 90kw

2. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Box of compact Wire真空吸水箱.

Capacity          : 45m3/min x 0.03-0.035Mpa.

Motor             : 75KW

3. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Couch Roll真空伏轆.

Capacity          : 129 m3/min x 0.065-0.07 Mpa.

Motor             : 185KW

4. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Pick-Up Roll 真空吸移轆.

Capacity          : 59m3/min x 0.065-0.07 Mpa..

Motor             : 75kw

5. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Centri Roll真空中心轆.

Capacity          : 145m3/min x 0.065-0.07 Mpa.

Motor             : 220KW

6. 1 SET VACUUM PUMP真空泵:

Application.    : Suction Centri Roll真空中心轆.

Capacity          : 69 m3/min x 0.025 Mpa.

Motor             : 75KW

7. 1 SET VACUUM PUMP真空泵:

Application.    : Felt Suction Box of 1^stPress part.

Capacity          :105m3/min x0.04-0.045 Mpa.

Motor             : 132KW

8. 1 SET VACUUM PUMP真空泵:

Application.    : Felt Suction Box of 2ndPress part.

Capacity          :130 m3/min x0.04-0.045 Mpa.

Motor             : 150KW

1. L) STEAM & DRAINAGE SYSTEM.蒸汽冷凝水系統

A complete steam and condensate system,designed for gross production of 350T/D

1. 2 Sets Drain Pump x 15 HP (1200L/mim×30mh)
2. 1 Set Vacuum Pump x 10 HP (3000L/mim×-200mh)

1. M) PAPER MACHINE DRIVEN PART 紙機傳動部:

本紙機傳動部共有32個傳動點。整個傳動部爲分部傳動，

採用交流電機，硬齒面減速機，變頻控制系統。每個傳動點均配有電機

、減速機、軸、聯軸器、底座等。輔助傳動電機與減速機採用直聯型。

Totally, there are 32points of main transmission.

Section the main transmission part are composed of inverter motor, hard-teeth gear reducer and inverter control system with sectional driven. Each transmission point are completed of inverter motor(made

by NanYang motor), reducer, shaft, coupling and sole plate. The connect between

assistant driven motor and gear reduce are connected directly.

M1.   1 LOT                 SECTIONAL AC DRIVE分段式傳動:

Universal joints

1 –kw    With Gear Box & Coupling     For Wire Roll.

2–kw     With Gear Box & Coupling     For compact Wire cylinder.

2–kw     With Gear Box & Coupling     For compact Wire couch&drive roll.

1–kw     With Gear Box & Coupling     For Suction Pick Up Roll.

1 –kwWith Gear Box & Coupling        For 1^st bottom Press Roll.

1 –kwWith Gear Box & Coupling        For 2nd Top Press Roll.

1 –kw    With Gear Box & Coupling     For Size press movable Roll.

5–kw     With Gear Box & Coupling     For paper Roll.

Flotation shafts

1 –kw    With Gear Box & Coupling     For Wire Drive Roll.

1 –kwWith Gear Box & Coupling        For Suction Couch Roll

1 –kwWith Gear Box & Coupling        For Suction centri press Roll

1 –kwWith Gear Box & Coupling        For 2nd bottom Press Roll.

1 –kw    With Gear Box & Coupling     For Size press stationary Roll.

7 –kw    With Gear Box & Coupling     ForNo.1-No.7 Dryer.

1 – kw   With Gear Box & Coupling     For Calender Stack Section.

1 – kw   With Gear Box & Coupling     For Pope Reel Section.

1 – kw   With Gear Box & Coupling     For Reel help drive

1 – kw   With Gear Box & Coupling     For brake generator

2 – kw   With Gear Box & Coupling     Main driver of rewinder.

.

==============================================================

1. N) DISC FILTER FOR WHITE WATER RECOVER 白水回收機

1. DISC FILTER 盤式過濾機: 1 SET

Type型號                                                                       :

Disc Diamension濾盤直徑                                  :

REMARKS 附註:

1.00    The following items are not included in this quotation:

下列項目不包括在本估價範圍內:

1.01    Building, Civil, Foundation works and Detail basic engineering.

建築物基礎及任何土木工程及其詳細基礎設計工作.

1.02    All pipings & piping materials(such as valves, flanges, expander/reducers,etc.)

所有漿料, 供排水, 送排風, 蒸氣, 油壓, 氣壓之配管工程及材料

(如閥,法蘭,異徑接頭)等等.

1.03    All tubing & tubing materials (such as valves, socket etc.)

所有管型工程及材料

1.04    All wiring & wiring  materials (such as cable, wires etc.).

所有配線工程及材料.

1.05    Power substation, all motor controls and its panel.

受電,變壓器,開關, 保險絲,配電設備, 控制儀錶及安裝.

1.06    Steam and condensate systempiping material and dryer hood.

蒸氣系統之配管及氣罩.

1.07    Intake water, its treatment, distribution network.  清水供應及其處理設備

1.08    Waste water treatment system, disposal system.    廢水處理系統之設備.

1.09    Chemicals, additives, coating color preparation, supply, circulation and

control system include tanks.

化學藥品及添加劑之備料,處理及控制系統設備及相關之桶槽.

1.10    Crane and material handing equipments.

起重機,天車及其相關之起重設備及安裝.

1.11     Machine clothings such as wire cloth, felt, canvas, belt etc.

操紙機用之不鏽鋼網,塑膠網,帆布,毛毯,輸送,水管及各種皮帶.

1.12    Oil, grease and lubricant.

油脂,潤滑油,油壓用油,清洗用油及相關器具.

1.13    Fire network and its equipments.消防系統及其設備.

1.14    Laboratory facilities.試驗儀器及材料.

1.15    DCS, QCS system. DCS, QCS must be prepared by end user.整廠監控系統.

1.16    Instruments, gauges etc. unless otherwise specified in the specification.

有關設備中所使用之各類儀錶. 報價中特別列出者除外.

1.17    All the Spare parts.所有備品備件.

1.18    Any item not specified in the specification.

所有在本估價單中未列明之設備與安裝工程.