CI-PC329 เป็นเครื่องวัดวิเคราะห์ความชื้น (Micro-humidityAnalysis System) อาศัยเทคโนโลยีไมโครคอนโทรลเลอร์ (Micro-controller Technology) ในการทำงาน โดยใช้เซ็นเซอร์ P2O5 (Phosphorus Pentoxide Sensor) เป็นหัววัด เหมาะสำหรับการวัดปริมาณความชื้นในระดับ trace moisture ในอุตสาหกรรมและสภาพแวดล้อมต่างๆ
CI-PC329 humidity analysis system is based on micro-controller technology.Using P2O5 sensor as measuring unit,it is suitable for measuring trace moisture humidity in various industries and environments.It can provide the humidity volume ratio (ppm) display or dew point temperature (C) display,users can switch freely.It has the functions of analog signal output,alarm switch output,communication and so on.
Additional information
Description
CI-PC329 humidity analysis system is based on micro-controller technology.Using P2O5 sensor as measuring unit,it is suitable for measuring trace moisture humidity in various industries and environments.It can provide the humidity volume ratio (ppm) display or dew point temperature (C) display,users can switch freely.It has the functions of analog signal output,alarm switch output,communication and so on.
Technical Specifications
1-5V, freely set mode
Load: less than 5000
Environmental
temperature: + +5~+45″C Environmental humidity:less than
80%RH
Gas source
pressure: 0.2-0.5 MPa
Sample gas
test pressure: Maximum 0.1 MPa when flowing through the
sensor (first through the pressure regulating
valve to reduce pressure)
Sample gas
flow rate: 300-400 ml/min
Bypass flow: 1 1.5-2L/min (for accelerating gas replacement,
adjustable as needed)
Sensor life: more than 2 years (normal use)
Analysis
system life: more than 5 years (normal use)
Analysis
system
weight: net weight about 16.5 kg
Cabinet size: L L*W*H=400 mm*300 mm*200 mm (excluding mounting brackets and joints,etc.)
Installation
hole size: L*W=260mm*426mm (4*09 bolt hole)
Technical Specifications
Testing principle Water Measurement by Electrolysis
Measurement
range: 0-500 ppm Hz0
Accuracy: Measured value (+5%),minimum 0.4 ppm
Reproducibility: +2% (10.0 ppm)
Stability: +1% FS/7d
Response time of
humidity
measurement: <1 second
Recovery time: T50<2 min
Measuring
method: on-line
Calibration cycle:one year (recommendation)
Display: 128 *64 LCD
Four keys (touch keys)
Power supply: 85-264VAC, 50/60Hz
Analysis system
power
consumption: less than 20VA
Communication: RS485
Alarm: Alarm output:a set of switching signals
Relay contact capacity:24VDC,0.2A
Analog output
signal: 1group,4-20mA/0-20mA/0-1V/0-5V/0-10V
Applications
ㆍClean room monitoring,such as glove box;
ㆍ Monitoring of protective gas and gas purification system;
ㆍChemical industry;
ㆍManufacturers and users of scientific and medical gases;
ㆍMicroelectronic devices;
ㆍMonitoring and inspection of compressed air system;
ㆍMechanical equipment engineering;
ㆍRefrigeration system;
ㆍDevelopment and experiment.
Product Features
ㆍThe front of the analysis system is covered with a piece of toughened glass, which is not only beautiful,but also has good protective effect,making the LCD screen not easy to be damaged,and prolonging the service life of
ㆍ The latest touch button technology is easy to operate and has a long service life.
ㆍMenu lock switch:to prevent misoperation to change the parameters of the analysis system to affect its
normal operation;
ㆍ Data storage function:recording test data regularly and querying stored data quickly;
ㆍ Alarm function:When the humidity deviates from the alarm value or runs incorrectly,the alarm value can be
set arbitrarily within the full range.
No Accessories data.
No Media Data.
หากลูกค้าสนใจสินค้าหมวดหมู่
Micro humidity analysis system – เครื่องวัดวิเคราะห์ความชื้น
สามารถติดต่อเราได้ที่นี่
