Dew Point Transmitter

Dew-Point Hygrometer ขนาดเล็กกระทัดรัดที่เต็มไปด้วย feature ที่ตอบสนองการใช้งานในอุตสาหกรรมสมัยใหม่มากมาย Fast-Response Dew-Point Hygrometer-Quick to Install Hygrometer System

Additional information

Application

Additive manufacturing, Adsorption dryers, Breathing air, Glove boxes, Medical and surgical air, Membrane dryers, Plastic injection moulding

Description

Dew-Point Hygrometer ขนาดเล็กกระทัดรัดที่เต็มไปด้วย feature ที่ตอบสนองการใช้งานในอุตสาหกรรมสมัยใหม่มากมาย

Fast-Response Dew-Point Hygrometer-Quick to Install Hygrometer System

The SF82 Online has been developed as a fast-response, quick-to-install hygrometer system for the complete dew-point measurement range of -60 up to +60 °C dew point, which covers many moisture measurement applications.

 

Performance Specifications
Measurement Range -60 to +60°C dew point; -50 to +50°C dew point; -50 to +30°C dew point;
non-standard dp ranges and ppmV ranges available on request
Accuracy ±2°C dew point*
Response Time T95 to -60°C dew point in <3 minutes
Repeatability 0.5°C dew point
Sensor Calibration Traceable 9-point calibration certificate
Electrical Specifications
Online Output Signals 4-20 or 0-20 mA, Modbus RTU over RS485; dual programmable relay alarms
Online Output Dew point
Maximum Analog Output Scaled Range Dew point: -80 to +20°C
Online Supply Voltage AC: 85 to 264V AC
Online Current Consumption 60 mA maximum
Electrical Safety EN61010-1
Operating Specifications
Operating Temperature Sensor: -20 to +60°C; Monitor: 0 to 50°C
Compensated Temperature Range Sensor: -20 to +50°C; Monitor: not applicable
Storage Temperature Sensor: -40 to +60°C; Monitor: -10 to 60°C
Operating Pressure 10 MPa (100 barg) maximum
Sensor Flow Rate 1 to 5 Nl/min mounted in standard sampling block; 0 to 10 m/sec direct insertion
Mechanical Specifications
Ingress Protection Sensor MiniDIN: IP66 in accordance with standard BS EN 60529:1992+A2:2013;
NEMA 4 protection in accordance with standard NEMA 250–2014
Sensor M12: IP65
Monitor: IP65 (NEMA 4X) front panel only
Sensor Housing Material 316 stainless steel
Dimensions Sensor: L=132mm x ø45mm (with connector cable)
Sensor M12: L=156mm x ø45mm (with connector cable)
Monitor: 1/8 DIN Case, 96 x 48 x 85mm (w x h x d)
Filter (Sensor Protection) Standard: HDPE <10μm
Sensor Process Connection 5/8” – 18 UNF, 3/4” – 16 UNF, G1/2” BSP
KF40 Flange Accessories Flange for 5/8” 18 UNF and 3/4” 16 UNF process connections
Sensor Weight 150g
Sensor Electrical Connections MiniDIN 43650 form C, M12 5 pin (A coded)
Online Sensor Cable 0.8, 2, 5, 10 metre connector/cable available
Sensor Diagnostic Conditions (factory programed) Sensor fault: 23 mA
Under-range dew point: 4 mA
Over-range dew point: 20 mA
  • Membrane dryers
  • Adsorption dryers
  • Medical and surgical air
  • Breathing air
  • Additive manufacturing
  • Glove boxes
  • Plastic injection moulding

Features

  • Measurement range -60 to +60 °C dew point
  • Accuracy ±2 °C dew point
  • 4 to 20 mA output
  • Modbus RTU over RS485 output
  • Dual configurable alarm outputs
  • Sample block and cable included
  • Traceable 9-point calibration certificate
  • Ultra-fast response to moisture change

No Accessories data.

No Media Data.

Additional information

Application

Additive manufacturing, Adsorption dryers, Breathing air, Glove boxes, Medical and surgical air, Membrane dryers, Plastic injection moulding

หากลูกค้าสนใจสินค้าหมวดหมู่

Dew Point Transmitter

สามารถติดต่อเราได้ที่นี่