Description

The Liquid Solids Control Gate Adaptor provides for quick, simple & safe removal of LSC refractometer sensing heads from active process pipelines for maintenance or calibration. While ensuring the ultimate in safety, this dedicated unit eliminates the need for costly unscheduled process line shutdowns or “by-pass loops”, which tend to cause problems.

The Gate employs a completely captivated plate that slides across the flow and does not pressurize the liquid between the sensing head and valve. It is mechanically sure, operated by an eccentric cam. Function of the gate adaptor is accomplished easily by turning a 1” (25mm) hex nut just under half a turn by wrench. Double encapsulated Teflon seals are provided against both sides of the slide plate ensuring a good seal.

It’s inherent design allows it to be locked via an external lock guaranteeing positive visual & physical assurance of locked “fully-open” or “fully-closed”. The lock cannot be engaged if the gate is less than 100% opened or closed. Limit switches allow for the divert controller to indicate closing of the gate adaptor, which automatically puts that unit out of service and goes into “single unit operation”.

Tasatec เป็นตัวแทนจำหน่าย และให้บริการหลังการขายเซนเซอร์ Isolation Valve
ท่านที่สนใจเซนเซอร์ Isolation Valve ติดต่อขอรายละเอียดเพิ่มเติมได้ตามช่องทางที่สะดวกด้านล่างนี้ได้เลยค่ะ