Moving Die Rherometer ASTM D5289 เครื่องทดสอบการคงรูปของยาง

Moving Die Rherometer ASTM D5289 เครื่องทดสอบการคงรูปของยาง

Testing of raw-rubber compounded in an evaluation formulation, and for evaluating various raw materials used in preparing rubber compounds.

Additional information

Description

Moving Die Rherometer ASTM D5289 เครื่องทดสอบการคงรูปของยาง

For determining selected vulcanization characteristics of vulcanizable rubber compounds using rotorless sealed torsion meter and measured according to ASTM D 5289, ISO 6502-3 and KS M ISO6502.

Moving Die Rheometer
The Vluchem’s moving die rheometer (MR-10) for determining selected vulcanization characteristics of vulcanizable rubber compounds using rotorless sealed torsion meter and measured according to ASTM D 5289, ISO 6502-3 and KS M ISO6502.
MR-10 may be used for quality control in rubber manufacturing processes, for research and development testing of raw-rubber compounded in an evaluation formulation, and for evaluating various raw materials used in preparing rubber compounds.
The instrument is equipped with the highest torque measurement, reliability, along with stiff hardware, superior heater, temperature sensor, temperature controller and Vluchem’s own designed data acquisition device and software.
Designed to be placed on a desk instrument and is supplied with the Vluchem’s own data analysis software for test management, data recording and printing, automated Pass/Fail testing as well as recall processing of historical data, also available an online upload software as an option.

Model MR-10
International Standard ASTM D 5289

ISO 6502

KS M ISO 6502

Motor Induction Motor
Die configuration Biconical, closed die system, sealed
Oscillation frequency 1.67Hz
Oscillation angle 0.5°[Option]1°, 3°, 5°
Mechanically adjustable
Protection for operator
Temp. shield screen moving
Before test chamber closing
Test chamber moving By Pneumatic
Motor Platen operation available by hardware
& software
Temperature control available by hardware &
software
Temperature range microprocessor controlled
RT ~ 220°C
Temp. Sensor Type PT 100 Ω
Torque range 0~ 200 dNm
Calibration Calibration jig
Data Torque[dNm, lbf.in]

Temperature [°C]

MH, ML Ts1, Ts2, Tc10(N), Tc50(N), Tc90(N)

Automatic test results pass/fail function

Trend graphs

Tolerance limits by time and torque

Data excel export function, Average, S-Dev

Pneumatics min 4.5 bar/60 Psi
Electrical 200~230V, 3A, single phase, 50Hz/60Hz
Emergency Button
Dimension W615 X D685 X H1200 mm
Weight 110 kgs

No Application

No Features data.

No Accessories data.

No Media Data.

หากลูกค้าสนใจสินค้าหมวดหมู่

Moving Die Rherometer ASTM D5289 เครื่องทดสอบการคงรูปของยาง

สามารถติดต่อเราได้ที่นี่