Prism wash is only used if the process being measured tends to coat. The appropriate wash medium (usually steam / water) with an adequate pressure is attached to the fitting provided. The frequency, duration & hold time of the wash is programmed via the touch screen menu.

​Our systems have “Smart wash” logic set by default which washes every 20 minutes only as long as necessary – usually 1 – 2 seconds. If needed, it can wash up to 30 seconds. If it detects it wasn’t successful, it automatically tries again. Some applications work best with a more consistent wash length in which case the typical length is between 2 to 10 seconds.

We are proud to offer an improved / compatible replacement for our ¼” NPTF prism wash ball valve. The Gemini 500 Series requires 50-125 psi air supply. The double-acting actuator lasts longer because it uses two opposing spring modules one on each end of the actuator. It can operate with as little as 50 psi on a spring to close valve. Allowing you to operate at 50 psi reliably and retain the “fail safe spring to close” feature which is most desirable. The LSC part number is still 190302-R-120 or -240 (depending on the VAC required.)

Tasatec เป็นตัวแทนจำหน่าย และให้บริการหลังการขายเซนเซอร์วัด Prism wash
ท่านที่สนใจเซนเซอร์วัด Prism wash ติดต่อขอรายละเอียดเพิ่มเติมได้ตามช่องทางที่สะดวกด้านล่างนี้ได้เลยค่ะ