Provides a Static Coefficient of Friction (COF) via the inclined plane method and conforms to a large number of ASTM, TAPPI, ISO and other standards for inclined plane friction testing.
Additional information
Description
A friction tester, also called a coefficient-of-friction (COF) tester, makes a measurement of a sheet-like substrate such as paper, corrugated, plastic film or Paper which determines the angle of inclination at which one substrate affixed to a sled will begin to slide/slip against the surface of another substrate of a similar material.
Instrument Size Depth: 130 mm (5 in.)
Height: 280 mm (11 in.)
Width: 560 mm (22 in.)
Width: 7 kg (16 lb)
Electrical: Specify voltage requirements when ordering
Applications:
Coefficient of Friction
Corrugated Testing
Industries:
Flexible Packaging
Inks & Coatings
Paper & Pulp
Materials:
Corrugated paper
Film
Foil
Paper
Plastics and Polymers
Standards:
ASTM D 202
TAPPI T 548
TAPPI T 815
- Motor-driven elevation
- Simple, low-cost measurement of static COF
- Photo sensor automatically stops the test after initial sled movement
- Measures only Slide Angle or Coefficient of Static Friction
- 0 to 80บ angle
- Slide-Angle COF Sled: 2.5in x 2.5in; 200g (TAPPI T 548 Method for Paper)
- Sliding Block for Printed Paper per TAPPI T-548 and Plastic Films.
- Slide-Angle COF Sled: 2.5in x 3 in; 235g (ASTM D202 -Method for Electrical Insulation)
- Slide-Angle COF Sled: 2in x 4in; 750g (“F” Type Sled – Method for Fiberboard)
- Sliding Block F/ Fiberboard
- Slide-Angle COF Sled: 3.5in x 4in; 1260g (TAPPI T-503 – Method for Shipping Sacks)
- Sliding Block for Shipping Sacks meets Tappi T-503.
- Slide-Angle COF Sled: 3.5in x4in; 1300g (TAPPI T 815 – Method for Packaging Materials and Fiberboard)
- Sled – 3.5″ X 4.6″ X 1000 Grams
No Media Data.
หากลูกค้าสนใจสินค้าหมวดหมู่
Slide Angle Coefficient of Friction (COF) Tester ASTM D 202
สามารถติดต่อเราได้ที่นี่
